Description

ASI M Series Metal Bonding Cyanoacrylate Super Glue

About the ASI M Series Metal Bonding Cyanoacrylate Super Glue

The Adhesive Systems Inc (ASI) M Series cyanoacrylate super glue was formulated for bonding metal to itself or metal to other substrates. It comes in a wide range of viscosities (thicknesses) and cures very quickly with a strong, permanent bond. 

Benefits of the ASI M Series Cyanoacrylates

• Great for bonding metal to metal
• Great for bonding metal to other substrates
• Single component (no mixing or nozzles required)
• Cures at room temperature
• Good for bonding most substrates
• Fast cure time
• Dispensing can be automated
• Long term bonds
• Economical
• Meets most military (MilSpec) standards
• Can replace heavy mechanical fasteners

The ASI M Series Cyanoacrylates Bond:

• ABS NBR
• Acrylic Neoprene
• Aluminum Nitrile
• Bakelite Nylon
• Brass Phenolic
• Chloroprene Polycarbonate
• Chrome Polyester
• Cooper Polystyrene
• EPDM Porcelain
• Fiberglass PVC
• Latex SBR
• Leather Steel
• Natural Rubber Valox
• Wood

Compare ASI M 100 to

• 3 BOND™ 1703
• ARON ALPHA™ 102
• CHEMENCE™ MC 100
• HENKEL™ 7000
• HERNON™ 110
• LOCTITE™ 496
• LORD™ GM
• PACER™ M -100
• PERMABOND™ 910

Compare ASI M 1000 to

• CHEMENCE™ MC 1500
• HENKEL™ 99
• LOCTITE™ 415
• LORD™ M
• PERMABOND™ 130

* The product names used in this website are for identification purposes only.
* All trademarks and registered trademarks are the property of their respective owners.

ASI M Series Cyanoacrylate Super Glue Specifications

• Color: Opaque/Slight Amber
• Viscosity: 5 cps
• Specific Gravity: 1.07
• Base: Methyl

ASI M Series Chemical and Solvent Resistance

Percent of Strength Retained After Aging for 500 Hours

• GASOLINE @ 220C: 100%
• ISOPROPANOL @ 220C: 100%
• ETHANOL @ 220C: 1005
• FREON TA @ 220C% 100%
• MOTOR OIL @ 400C% 100%
• POLYCARBONATE 400C @ 95% RH 100%

ASI M Series Cure Time and Bond Strength By Substrate

• Steel < 10 Seconds > 2100 psi
• Aluminum < 10 Seconds > 1750 psi
• Neoprene < 5 Seconds > 750 psi
• ABS < 7 Seconds > 900 psi
• PVC < 5 Seconds > 900 psi
• Polycarbonate < 7 Seconds > 900 psi
• Phenolic < 7 Seconds > 850 psi

ASI M Series Specifications by Viscosity

PRODUCT	GAP FILL	VISCOSITY	STRENGTH	TEMP RANGE	CURE SPEED (FIXTURE/FULL)	MIL SPEC A 46050C
M 5	0.002	5 cps	2800/4000	-85 to +200° F	<5 Sec/8 Hours	Type I, Class 1
M 60	0.004	60 cps	2800/4000	-85 to +200° F	<8 Sec/8 Hours	Type I, Class 2
M 100	0.006	100 cps	2800/4000	-85 to +200° F	<10 Sec/8 Hours	Type I, Class 2
M 1000	0.008	1,000 cps	2800/4000	-85 to +200° F	<10 Sec/8 Hours	Type II, Class 3

ASI M Series Cyanoacrylate Data Sheets

ASI M Series Technical Data Sheets

• ASI M 5 TDS
• ASI M 60 TDS
• ASI M 100 TDS
• ASI M 1000 TDS

ASI M Series Material Safety Data Sheet

• ASI M SERIES MSDS