Description

ASI TS Series Clear Toughened Cyanoacrylate Super Glue

About the ASI TS Series Cyanoacrylate Super Glue

ASI TS Series super glue is a toughened formulation meaning it has added properties to offer maximum impact resistance. This cyanoacrylate also has very good temperature resistance including standing up to thermo cycling between hot and cold transitions. The TS Series Cyanoacrylate is great for bonding dissimilar materials on a wide array of surfaces. 

Compare ASI TS 2400 to

• HERNON™ 131

* The product names used in this website are for identification purposes only.
* All trademarks and registered trademarks are the property of their respective owners.

Benefits of the ASI SI Series Cyanoacrylates

• Bonds almost any substrate
• Faster than most super glues
• Single component (no mixing or nozzles required)
• Cures at room temperature
• Good for bonding most substrates
• Fast cure time
• Dispensing can be automated
• Long term bonds
• Economical
• Meets most military (MilSpec) standards
• Can replace heavy mechanical fasteners

ASI TS Series Cyanoacrylate Specifications

Properties

• Color: Clear/Opaque
• Viscosity: 300
• Specific Gravity: 1.10
• Base: ModifiedEthyl

ASI TS Series Chemical and Solvent Resistance

Percent of Strength Retained After Aging for 500 Hours

• GASOLINE @ 220C: 100%
• ISOPROPANOL @ 220C: 100%
• ETHANOL @ 220C: 100%
• FREON TA @ 220C% 100%
• MOTOR OIL @ 400C% 100%
• POLYCARBONATE 400C @ 95% RH 100%ASI NI-M Series Cure Time and Bond Strength By Substrate

ASI TS Series Cure Time and Bond Strength By Substrate

• Steel < 12 Seconds > 2100 psi
• Aluminum < 12 Seconds > 1750 psi
• Neoprene < 5 Seconds > 750 psi
• ABS < 10 Seconds > 900 psi
• PVC < 5 Seconds > 900 psi
• Polycarbonate < 10 Seconds > 900 psi
• Phenolic < 10 Seconds > 850 psi

ASI TS Series Cyanoacrylate Specifications by Viscosity

PRODUCT	GAP FILL	VISCOSITY	STRENGTH	TEMP RANGE	CURE SPEED (FIXTURE/FULL)	MIL SPEC A 46050C
TS 300	0.006	300 cps	3750	-65 to+250° F	<10 Sec/8 Hours	Type II, Class 2
TS 800	0.008	800 cps	3750	-65 to+250° F	<15 Sec/8 Hours	Type II, Class 3
TS 2400	0.01	2,400 cps	3750	-65 to+250° F	<15 Sec/8 Hours	Type II, Class 3
TS 4000	0.01	4,000 cps	3750	-65 to+250° F	<18 Sec/8 Hours	Type II, Class 3

ASI TS Series Cyanoacrylate Data Sheets

ASI TS Series Technical Data Sheets

• ASI TS 300 TDS
• ASI TS 800 TDS
• ASI TS 2400 TDS
• ASI TS 4000 TDS

ASI TS Series Safety Data Sheet

• ASI TS SERIES MSDS