Description

Oxford Alloys #OXF70S-23/32X36 Metallic Luster ER70S-2 Carbon Steel Bare Rod

Oxford Alloys #OXF70S-23/32X36 Metallic Luster ER70S-2 Carbon Steel Bare Rod, 3/32 Inch dia. x 36 Inch L, 40 lb Box (4 TUBES PER BOX)        NEW SURPLUS

Detailed Description

Oxford Alloy ER70S-2 is a triple deoxidized (aluminum, titanium, zirconium) welding wire. The less fluid weld puddle of Oxford Alloy ER70S-2 makes it easier to control when used out of position. This wire is preferred for all position welding of small diameter pipe

Features

100% argon shielding gas for TIG (GTAW)

98% argon + 2% oxygen/75% argon + 25% Co2 shielding gas for MIG (GMAW) spray transfer

100% Co2/75% argon + 25% Co2 shielding gas for MIG (GMAW) short circuiting transfer

15 – 20 volt TIG (GTAW)

Oxford Alloys® 70S-23/32X36 Carbon Steel Bare Rod, Diameter: 3/32 Inch, Length: 36 Inch, Amperage: 125 – 175 amp TIG (GTAW), Package: 50 lb Box (Tube), AWS Class: AWS 5.18: ER70S-2, Metallic Luster, Tensile Strength: 79750 psi, Yield Strength: 71050 psi, Elongation in 2″ (%): 29%, Welding Process: TIG (GTAW)/MIG/SAW, Weld Metal Composition: 0.07% Carbon (C), 0.90 – 1.40% Manganese (Mn), 0.40 – 0.70% Silicon (Si), 0.025% Phosphorus (P), 0.035% Sulphur (S), 0.15% Nickel (Ni), 0.15% Chromium (Cr), 0.15% Molybdenum (Mo), 0.03% Vanadium (V), 0.05 – 0.15% Aluminum (Al), 0.02 – 0.12% Zirconium (Zr), 0.05 – 0.15% Titanium (Ti), 0.50% Copper (Cu), Applicable Materials: Mild, Low Alloy Steel

Technical Details

Amperage

125 – 175 amp TIG (GTAW)

Applicable Materials

Mild, Low Alloy Steel

AWS Class

AWS 5.18: ER70S-2

Color

Metallic Luster

Diameter

3/32 Inch

Elongation in 2″ (%)

29%

Length

36 Inch

Package

50 lb Box (Tube)

Tensile Strength

79750 psi

Weld Metal Composition

0.07% Carbon (C), 0.90 – 1.40% Manganese (Mn), 0.40 – 0.70% Silicon (Si), 0.025% Phosphorus (P), 0.035% Sulphur (S), 0.15% Nickel (Ni), 0.15% Chromium (Cr), 0.15% Molybdenum (Mo), 0.03% Vanadium (V), 0.05 – 0.15% Aluminum (Al), 0.02 – 0.12% Zirconium (Zr), 0.05 – 0.15% Titanium (Ti), 0.50% Copper (Cu)

Welding Process

TIG (GTAW)/MIG/SAW

Yield Strength

71050 psi